日本SMC压力开关安装方法

The settings of the master sensor can be copied to the slave sensors,
reducing setting labor and minimizing risk of mistakes in setting.
Can copy to up to 10 switches simultaneously.
(Maximum transmission distance 4 m)

主传感器的设置可以被复制到从传感器
减少设置劳动和尽量减少环境中的失误风险。
可同时复制到多达10个开关。（zui大传输距离4米） 

日本SMC压力开关安装方法

1) The sensors are connected by a dedicated lead wire
(ZS-38-5L (for master and one slave) or ZS-38-U (for
master and up to 10 slaves)). Copying is performed
through a dedicated communication line.
2) Select the slave switch which is to be the master, and
change it into a master using the buttons. (In the default
setting, all switches are set as slaves.)
3) Press the button of the master switch to start
copying.

1）的传感器由一个的引线连接
（ZS-38-5L（硕士和一个从）或ZS-38-U（用于
主站和zui多10个从站））。复制的执行
通过通信线路。
2）选择从交换机是成为高手，
它改成使用按钮的高手。 （在默认
设定，所有开关都设置为奴隶。）
3）按总开关的按钮启动复制